Thank You — IncCommand

✅ Order Confirmed · Payment Received

Welcome to
IncCommand

Your IncCommand department license is active for one year from today and covers every member of your department. Open IncCommand below, install it on the DSO’s device first, then use the roll-out steps further down for the rest of your team.

1-year department license — unlimited personnel All updates during your year 30-day money-back guarantee Mastering Buoyancy — PDF & Kindle

Your Planner Is Ready

Open it in your browser now, then follow the install guide below to save it offline on every device you use.

🛡️ IncCommand — Public Safety

IncCommand

🟢 Rescue Mode 🟡 Recovery Mode
NIMS/ICS · OSHA 1910.410 enforcement · ICS role manifest · Chain-of-custody · Incident reports · Decon checklist · Dept. license = unlimited personnel
depthplanner.com/inccommand/ Open IncCommand →
How access works: IncCommand is a browser-based app: open the URL, install it to each phone, tablet or laptop (instructions below), and it runs 100% offline from then on. There is no login, no account and no app store. Your department license covers every diver, supervisor, DSO and device for one year from your purchase date. If a device’s browser cache is cleared, revisit the URL once on WiFi to re-cache it.

Browser & Device Compatibility

Device / OS Best Browser PWA Install Offline Works Notes
📱 iPhone / iPad Safari ✓ Full ✓ Safari recommended. On iOS 16.4+, Chrome can also add it via Share → Add to Home Screen
🤖 Android Phone / Tablet Chrome ✓ Full ✓ Samsung Internet also works; Firefox Android cannot install
🍎 Mac (macOS 12+) Chrome, Edge or Safari ✓ Full ✓ Safari needs macOS 14 Sonoma or later: File → Add to Dock
🪟 Windows 10 / 11 Chrome or Edge ✓ Full ✓ Edge works especially well on Windows; installs to Start Menu
🐧 Linux / ChromeOS Chrome ✓ Full ✓ Installs as a desktop app via Chrome
💻 Any device (no install) Any modern browser — Runs in tab Online only Works in-browser without installing — but offline requires PWA install
🚫 Firefox (all platforms) Not recommended ✗ No install ✗ Firefox has only limited web-app install (Windows taskbar, Android). We test on Chrome, Edge and Safari — use one of those

Install for Offline Use — Step by Step

Pick your device. Takes about 60 seconds. Repeat on every device you use.

depthplanner.com/inccommand/
ℹ️IncCommand includes both Rescue Mode and Recovery Mode plus full USN Rev 7 dive planning — all in a single install. Your department license covers every member and every device for as long as your subscription is active.
⚠️Use Safari on iPhone/iPad (recommended). On iOS 16.4 or later, Chrome can also add the planner via Share → Add to Home Screen. Whichever you use, run the offline test below.
01
Open Safari → IncCommand

In Safari, navigate to depthplanner.com/inccommand/. Wait for the full app to load — you’ll see the IncCommand interface with the Rescue/Recovery toggle.

02
Tap the Share button ⬆

Tap the Share button at the bottom — square with arrow pointing up. Tap the screen once if the toolbar is hidden.

03
Add to Home Screen

Scroll down in the share sheet and tap “Add to Home Screen”. Name will prefill as “IncCommand” — tap “Add” in the top right.

04
Always open from the icon

Tap the IncCommand icon on your home screen. Opens full-screen. For offline use at the incident scene, always launch from the home screen icon — not from Safari’s address bar.

✈️ Test offline: Airplane Mode on, tap the icon. If it loads — you’re ready for the next call.
⚠️Use Chrome or Samsung Internet (recommended). Other browsers may only create a shortcut that doesn’t work offline.
01
Open Chrome → IncCommand

Navigate to depthplanner.com/inccommand/ in Chrome and let it fully load.

02
Install from menu or banner

Tap ⋮ menu → “Add to Home screen” or “Install app”. Tap the install banner if it appears automatically at the bottom of the screen.

03
Confirm and launch

Tap “Add” or “Install”. Find IncCommand in your app drawer. Tap the icon — opens as a standalone full-screen app.

04
Samsung Internet alternative

On Galaxy devices: navigate to the URL in Samsung Internet, tap ☰ menu → “Add page to” → “Home screen”.

✈️ Test offline: Airplane Mode on, open from home screen. Loads without signal — ready for any scene.
⚠️Chrome or Edge recommended. On macOS 14 Sonoma or later, Safari also works: File → Add to Dock. Run the offline test below either way.
01
Open Chrome or Edge → IncCommand

Navigate to depthplanner.com/inccommand/ and wait for it to fully load.

02
Click the install icon

Chrome: look for a ⊕ or ⬇ icon in the address bar. Edge: look for a + icon. Or go to ⋮ / ··· menu → “Install IncCommand”.

03
Install and add to Dock

Click “Install”. IncCommand opens in its own window and an icon is added to your Dock and Applications folder. Right-click the Dock icon → “Keep in Dock” for quick access during exercises and incidents.

✈️ Test offline: Disconnect WiFi, open from Dock. Loads without internet — command post ready.
01
Open Chrome or Edge → IncCommand

Navigate to depthplanner.com/inccommand/ and wait for it to fully load.

02
Install from address bar or menu

Click the ⊕ monitor icon (Chrome) or + icon (Edge) in the address bar. Or go to ⋮ / ··· → “Install IncCommand” / “Apps → Install this site as an app”.

03
Confirm and pin to taskbar

Click “Install”. IncCommand gets a Desktop shortcut and Start Menu entry. Right-click the taskbar icon → “Pin to taskbar”. During training exercises, instruct your supervisor to open it from the taskbar.

✈️ Test offline: Disconnect WiFi, open from Desktop — loads without internet.
01
Open Chrome → IncCommand

Navigate to depthplanner.com/inccommand/ and let it fully load.

02
Install from address bar

Click the ⊕ icon in the address bar or go to ⋮ → “Install IncCommand”. Click “Install”.

03
Launch from app menu

IncCommand appears in your application menu (Linux) or launcher (ChromeOS). Opens as a standalone window.

✈️ Test offline: Disconnect, open from launcher — ready.
🛡️For rugged devices and dedicated command post computers — Panasonic Toughbook, Getac, Dell Latitude Rugged, and similar field hardware.
01
Confirm browser (Chrome or Edge recommended)

Most rugged Windows laptops ship with Edge. Check which browser is installed: Edge and Chrome both support full PWA install. Avoid Internet Explorer — it won’t work.

02
Connect to WiFi / hotspot for initial cache

Navigate to depthplanner.com/inccommand/ and let the entire app load fully. This caches all app assets on the device. You only need internet this one time per device.

03
Install to Desktop or taskbar

Click the + or ⊕ icon in the address bar → “Install”. Add the Desktop shortcut. On the vehicle laptop, pin to taskbar. Test while connected first.

04
Verify offline before going operational

Disconnect from WiFi, close all browsers, and open IncCommand from the Desktop shortcut. If it opens — you’re offline-ready. Do this verification before the first deployment.

05
Cache refresh on updates

When updates are pushed to IncCommand, open the app while on WiFi once and the new version caches automatically. No reinstall required — just leave it open on WiFi for 30 seconds.

🛡️ Field-ready check: Full Airplane Mode, Desktop shortcut, loads in under 3 seconds — you’re operationally ready.
Department Roll-Out — Getting Your Whole Team Set Up

Your IncCommand department license covers every diver, every supervisor, every DSO, and every device in your department — no per-person fees, no activation codes, no user accounts. Here’s how to deploy it to your team.

  • No accounts, no passwords. Every team member just needs the URL: depthplanner.com/inccommand/. They open it in Safari (iPhone) or Chrome (everything else), install to home screen, done.
  • Each person installs on their own device. The install is per-device, not per-person. One diver might install on their personal phone AND the station tablet — both installs are covered.
  • Station / apparatus tablets. For a shared iPad or Android tablet mounted in a vehicle or at the station, use the same install process. Anyone who picks it up can use IncCommand — no login required.
  • Dive Safety Officer setup. The DSO’s device is the command device. Install on their primary field device first, verify offline, then run a tabletop exercise before operational deployment.
  • New hires and transfers. Send them the URL. They install. They’re covered. No admin action needed on your end.
  • Recommended minimum: install on these devices per team — DSO’s phone, Dive Supervisor’s phone or tablet, incident command post laptop/tablet, at least one backup device in the apparatus.
  • Roll-out message for your team. Copy and send:

    Team — install IncCommand on your phones and tablets. Open depthplanner.com/inccommand/ in Safari (iPhone) or Chrome (Android/laptop). Follow the install prompt to save it to your home screen. Once installed it works completely offline — no cell service or WiFi needed at the scene. Installs take about 60 seconds. See the DSO if you have any questions.
  • Training exercise tip. Run your first tabletop with IncCommand before operational use. Create a mock incident, fill in the ICS manifest, toggle Rescue → Recovery mode, and generate a test incident report. Your team will be fluent in under 30 minutes.

More from DepthPlanner: DiveCommand (recreational & technical) · NavCommand (commercial). Built by the same working divers and tested to the same standard.

📚
★ Free Bonus · #2 Amazon New Release

Mastering Buoyancy: The Internal Ballast System

Your free PDF and Kindle copy is in your confirmation email. Written by Scott Fontecchio, PADI MSDT and SSI Master Instructor — the same instructor who built these tools. If you don’t see the email, check spam or contact us and we’ll send it directly.

Questions or issues?
Email scott@diverobotix.com — we’re real divers and we’ll get back to you fast.
30-day money-back guarantee — no questions asked, no hoops.

Scroll to Top