NavCommand Team Manual
How a commercial dive team plans a dive day in NavCommand: the planner, the dive clock, the commercial dive plan, limits, saving and exporting.
Start here
NavCommand is the DepthPlanner planner for commercial dive teams. It plans air and nitrox dives on the U.S. Navy Diving Manual Rev 7 no-decompression and decompression tables, tracks each diver’s nitrogen through the day, and produces an ADCI / OSHA commercial dive plan. Try it free at depthplanner.com/navy/. It opens in a web browser and saves on the device you use it on. Ongoing use is covered by a single-user or team license; see About NavCommand.
Three things a new crew should hear on day one:
- No logins to manage. Licensed crews open the page and start; there are no user accounts or passwords to keep track of on site.
- Data lives on the device. Nothing is uploaded. Take the JSON backup at the end of every dive day.
- It is a planning aid. The app says so on screen: check every plan against the published tables before the dive, and decisions on site remain with the Diving Supervisor.
Labels in bold are the words on the screen.
Quick start
Put it on the device (once)
- Open depthplanner.com/navy/ in the browser on the supervisor’s tablet or phone.
- Add it to the Home Screen and open it from that icon from then on. The Autosave & Recovery card shows whether storage is protected.
- Allow Location so Log Entry and Log Exit can capture GPS.
What is on the screen
| Where | What it is |
|---|---|
| Top | Jump buttons: Plan, Schedule, Clock, N₂, Gas, Settings, DCS, OSHA records, Fly |
| Settings row | Altitude, Water Type, Units, Tech Gas Planning |
| Middle | Cards in working order: nitrogen status, gas, dive clock, Dive 1, Dive 2, schedule, day log, commercial plan |
| Bottom bar | Log Entry (diver in water), Log Exit (diver surfaced), DCS Treatment |
| Bottom of page | Saved marker, Reset Plan, Print Dive Plan, Commercial Plan |
A dive day, step by step
- Settings. Set altitude, water type and units. Leave altitude off at sea level.
- Set Project. Project / job name, client, site / location.
- Add divers to the roster. Full name is required; certification and cert number are optional.
- Select Breathing Gas. Air, EAN32, EAN36, EAN40 or custom.
- Dive 1. Pick the diver under Planning For, tap a depth and a bottom time. Pressure group, no-decompression time remaining and CNS oxygen appear at once. Tap Save to Schedule. Repeat for each diver.
- Commercial Dive Plan Generator. Fill in the plan, confirm the OSHA items, and generate a Single-Diver Plan or a Team Plan.
- Master Dive Clock. Tap LS when the diver leaves the surface, RB on reaching bottom, LB on leaving bottom, RS on reaching the surface. Then Send to quick log.
- Surface interval. Type it, or tap Diver surfaced — start SI clock. Tap Plan Dive 2 for a repetitive dive.
- Day Log. At the end of the day take the PDF Day Summary, the CSV Download and the JSON Backup.
Bottom time runs from leaving the surface to leaving the bottom and is rounded up to the next whole minute, as the Navy manual defines it.
The cards, one by one
| Card | What it holds |
|---|---|
| Diver Nitrogen Status | Each diver’s current group through the day, with residual nitrogen time at 60, 80, 100, 130, 150 and 190 ft |
| Quick Log Dive | Diver, supervisor, depth, bottom time, max depth, surfaced time, and an incident flag: None, Near-Miss, DCS or AGE |
| Diver-in-Water Log | Log Entry and Log Exit capture GPS position and time for the diver you pick |
| Master Dive Clock | The depth-time record for one diver. Times are stored on the device and survive a reload |
| Dive 1 / Dive 2 | Depth, bottom time, optional Cold / Strenuous margin, required decompression stops and total ascent time when the limit is passed |
| Dive Schedule | Today’s dive order: diver, planned, actual, gas, notes, status |
| Day Log | Every dive logged today |
| Gas Planning | SAC rate, tank, fill, planned depth and time, and a gas rule: thirds, halves, 500 psi reserve, or quarters. Surface-supplied dives get a bailout check from the gauge reading on deck |
| OSHA Emergency Aid & Incident Records | The emergency aid list from the commercial plan, and a record for any dive flagged DCS or AGE |
| DCS / AGE Treatment | Reference trackers for Navy Treatment Tables 5, 6 and 6A. Table choice, extensions and changes belong to the Diving Medical Officer and chamber supervisor |
| Flying & Altitude After Diving | Wait time by highest group in the last 24 hours |
The commercial dive plan
The Commercial Dive Plan Generator fills itself from the Dive 1 and Dive 2 plan, then asks for the rest. One supervisor signature covers the complete dive day.
| Section | Fields |
|---|---|
| Personnel | Diver name and certification number, dive supervisor, standby diver, diver tender, dive medical officer |
| Job site | Project / job name, contract or PO number, location, GPS, vessel or platform, date |
| Dive objective | Work type, dive mode (surface-supplied air or SCUBA), task description |
| Emergency information | Nearest recompression chamber and phone, DAN line, local emergency or Coast Guard, transport to chamber, nearest hospital |
| Environmental conditions | Visibility, current, water temperature, surface conditions, bottom composition, hazards |
| OSHA Subpart T crew, pre-dive and mode procedures | Dive platform, USCG Rescue Coordination Center, SCUBA tending, and a tick list of the requirements that apply to this plan, each with its regulation number |
| Job Hazard Analysis | A starting checklist for the chosen work type. It is not exhaustive; add site hazards in the notes |
| Equipment checklist and supervisor notes | Abort criteria, special procedures, site-specific hazards |
A plan cannot be generated until every applicable OSHA item is confirmed. The app notes that ADCI Consensus Standards requirements are not included yet, and that state plans can be stricter than federal OSHA.
Limits
| Item | Limit | Note |
|---|---|---|
| Depth on air | 35 to 190 ft on the buttons | The ppO₂ 1.4 working limit for air is 187 ft. 190 ft is on the Navy air table and is offered with an oxygen warning |
| Depth on nitrox | Capped at the mix’s maximum operating depth at ppO₂ 1.4 | Deeper buttons are hidden |
| Dive 1 bottom time | 1 to 720 minutes | |
| Dive 2 bottom time | 1 to 360 minutes | |
| Gas | Air, EAN32, EAN36, EAN40, custom 21 to 100% O₂ | Navy air tables only; no helium schedules |
| Site altitude | Up to 14,000 ft in the entry field | Enter actual depths. A sealed sea-level gauge needs 1 fsw added per 1,000 ft |
| Surface interval | 0 to 24 hours | |
| Surface-supplied air (OSHA mode limit shown) | 190 fsw, or 220 fsw for bottom times of 30 minutes or less | Chamber ready deeper than 100 fsw or outside no-decompression limits |
The no-decompression limits printed on the depth buttons for a clean diver on air at sea level are: 35 ft 232 min, 40 ft 163, 50 ft 92, 60 ft 63, 70 ft 48, 80 ft 39, 90 ft 33, 100 ft 25, 110 ft 20, 120 ft 15, 130 ft 12, 140 ft 10, 150 ft 8, 160 ft 7, 170 ft 6, 180 ft 6, 190 ft 5. They shorten for a repetitive dive or at altitude, so read the limit off the screen for the dive you are planning.
Tech Gas Planning and helium mixes
Tech Gas Planning adds doubles, stage and bailout bottles to the gas supply plan and unlocks a trimix button for that purpose. NavCommand’s decompression tables are the Navy air tables. When a mix contains helium, the app shows a red warning that the groups, limits and stops are air-table references only and that the dive must be planned with mixed-gas tables or dedicated decompression software.
Saving your work
There is no Save button to remember. Every field saves as you type, on this device only, and a Saved marker confirms it.
| Feature | What it does |
|---|---|
| Autosave | Close the app, reopen it, and the day is still there |
| Resume prompt | A plan in progress is offered back after a reload |
| Earlier versions | A copy is kept every few minutes. Open Restore an earlier version in the Autosave & Recovery card |
| Save & Refresh App | Saves, then reloads the app to pick up a new build |
| Second-tab guard | If the day is updated in another tab or window, the out-of-date copy stops saving |
Exporting and printing
| Output | Button | Format |
|---|---|---|
| Dive plan | Print Dive 1 or Print Dive Plan | Print or PDF |
| Commercial dive plan | Single-Diver Plan or Team Plan — all divers | Print or PDF |
| Day summary | PDF Day Summary | |
| Dive log | CSV Download | CSV |
| Full backup | JSON Backup | JSON file |
End-of-day checklist
- Every dive on the schedule shows actual times
- Any DCS, AGE or near-miss flagged and its record completed
- PDF Day Summary saved
- CSV downloaded
- JSON Backup downloaded and filed off the device
- Fly card checked before anyone travels to altitude
NavCommand is a planning aid. It does not replace dive training, a qualified Diving Supervisor, or your company’s safe practices manual. Check every plan against the published U.S. Navy Rev 7 tables before the dive. Comply with OSHA 29 CFR 1910 Subpart T and the standards that apply to your operation. Diverobotix LLC · depthplanner.com