IncCommand Team Manual
How a public safety dive team sets up, adopts and runs IncCommand: every form, every limit, saving and exporting, step by step.
Start here
IncCommand is the DepthPlanner planner for public safety dive teams running a callout under NIMS/ICS. Try it free at depthplanner.com/inccommand/. It opens in a web browser and saves on the device you use it on. Ongoing team use is covered by a department license; see About IncCommand. It plans SCUBA dives to 130 fsw on the U.S. Navy Diving Manual Rev 7 air tables.
Three things a new team should hear on day one:
- No logins to manage. Licensed teams open the page and start; there are no user accounts or passwords to keep track of at a scene. Add it to the Home Screen and it opens like an app, including offline.
- Data lives on the device. Nothing is sent to a server. A tablet that is lost or wiped takes its records with it unless you downloaded a backup.
- The planner supports the supervisor; it does not replace one. IncCommand states it on screen: it is not a substitute for dive training, a certified dive supervisor, or an approved dive computer, and field decisions remain with the Dive Safety Officer.
Labels in bold are the words on the screen.
Quick start
A new user can open IncCommand and plan a first dive in under five minutes. There is one page; everything is a card on it.
Put it on the device (do this once)
- On the team tablet or phone, open depthplanner.com/inccommand/ in the browser.
- Add it to the Home Screen. On iPhone or iPad: Share, then Add to Home Screen. On Android or a laptop: use the browser’s Install or Add to Home Screen option.
- From now on, open it from that icon, not from a browser tab.
- Scroll to Data & Backup and read the first line of the card. If it says storage is not marked persistent, tap Ask to keep data. This asks the browser to promise it will not clear IncCommand’s saved data on its own. The full steps are in Back up, restore and share.
Step 3 matters on Apple devices. The app warns that in a Safari tab, Safari can delete saved data for a site that has not been used for 7 days. The Home Screen icon avoids that.
What is on the screen
| Where | What it is |
|---|---|
| Top | Mode switch: Rescue / Immediate Life Safety (blue) or Recovery / Evidence / Body Recovery (amber) |
| Under the mode switch | Jump buttons to each card: Plan, Log, Team, Gas, Alt / Water, Incident, DCS, ICS 206, Fly, Ask |
| Middle | The cards themselves, in working order. Tap a card header to open or close it |
| Bottom bar, always visible | Log Entry (diver in water), Log Exit (diver surfaced), DCS Emergency |
| Bottom of page | Saved marker, Reset Plan, New Incident, Incident Report |
Your first plan, in six taps
- Team Manifest: tap + Add Team Member, enter a name, pick the ICS role, add the certification.
- Planning For: pick that diver.
- Select Depth: tap a depth button, or type the measured depth. A typed depth rounds up to the next table row.
- Bottom Time: tap a time or type one. The pressure group, no-decompression time remaining and CNS oxygen appear straight away.
- Tap Save to Schedule. The dive is now in the Dive Schedule / Operations Log.
- Tap Print Plan if you want it on paper.
That is the whole core loop. Everything else in this manual is documentation around it.
Team adoption plan
A team can go from never having seen IncCommand to using it on a callout in four sessions. Do not skip the drill: the first time the team uses it should not be at a real scene.
Who does what
| Team role | IncCommand job |
|---|---|
| Team leader or Dive Safety Officer | Owns the rollout. Decides the PAR interval, turn-pressure rule and annual training hours from the team’s SOG. Reviews every plan |
| Log Tender / Recorder | Runs the device at the scene: taps Start, Left bottom, Surfaced, logs pressure reports and PAR checks |
| One named backup recorder | Can do the recorder’s job alone |
| Records custodian (often the team leader) | Downloads the backup after every incident and training day and files it where the agency keeps records |
Session 1: set up the devices (30 minutes, team leader and recorder)
- Pick the device that goes to scenes. One device holds the incident. A second device is a spare, not a second copy.
- Install to the Home Screen and protect its storage (see Back up, restore and share).
- Allow Location when asked, so Log Entry, Log Exit and Detect can fill GPS.
- Turn the device volume up. Alerts beep and vibrate.
- Open Training Log and enter Annual target hours (your SOG).
- Decide where backups are filed (agency drive, records system) and who files them.
Session 2: classroom walk-through (60 minutes, whole team)
- Project the app. Explain Rescue and Recovery modes and what each demands for staffing.
- Add every member to the Team Manifest with role and certification. Type names the same way every time; nitrogen carryover between callouts matches divers by name.
- Plan one no-decompression dive together, then a repetitive dive after a surface interval.
- Type a bottom time past the limit so everyone sees the Required Decompression panel and the chamber notice.
- Open the DCS / AGE Emergency card and read the five steps aloud.
- Show Download full backup and Restore an earlier version.
Session 3: pool or shoreline drill (half day)
- Set Incident Type to Training / Drill.
- Run it as a real callout, start to finish, using the callout sequence in the next chapter.
- Have the recorder log a real air report every few minutes and complete at least two PAR checks.
- Generate the incident report, print the ICS 206 and ICS 214, export the CSV.
- In Training Log, tap Log this drill, which appears when the incident type is Training / Drill.
- Download the backup and file it.
- Debrief: what was slow, what was missed, what the SOG should say about who holds the tablet.
Session 4: second drill with a different recorder
Repeat session 3 in Recovery mode with the backup recorder on the device. Include a chain-of-custody item and a search segment. After this, the team is ready to use IncCommand on a callout.
Go-live rule
Write one line into the SOG: who carries the device, who is the recorder, and that paper tables and a paper log sheet stay in the truck. A dead battery must never stop a dive operation.
Running a callout, start to finish
The app is laid out in the order a callout happens: who, what gas, the plan, the dive, then the paperwork. In Rescue mode the paperwork deliberately sits below the plan so nothing delays the first diver.
Before the first diver enters
- Pick the mode. Rescue for immediate life safety. Recovery for evidence or body recovery.
- Team Manifest. Add the Primary Diver first, then Standby, DSO and Tender. The staffing banner turns green when the mode’s staffing is met.
- Gas. Tap Air, EAN32, EAN36 or Custom. Pick the cylinder and fill pressure to get rock bottom.
- Alt / Water. Leave at Sea Level and Salt Water unless the site is at altitude or fresh water. At altitude, type the site elevation.
- Pre-Dive Safety Checklist. Ten items; the counter shows 0/10 to 10/10.
- Dive 1. Pick the diver, depth and bottom time. Tap Save to Schedule.
While divers are in the water
- In the Dive Schedule / Operations Log, tap Start when the diver leaves the surface. The bottom-time clock runs.
- Tap Log Entry on the bottom bar to stamp the entry GPS and time on the Incident card. It does not start the dive clock; Start does.
- Enter the diver’s starting pressure and turn pressure. Log each pressure report as the tender relays it.
- Answer each PAR check when the timer calls for it.
- Tap Left bottom when the diver starts up. This stops the bottom-time clock the Navy way: leaving the surface to leaving the bottom, rounded up to the next minute.
- Tap Surfaced when the diver is on the surface, and Log Exit to stamp the exit GPS.
- Tap Diver surfaced — start SI clock if the diver may go back in.
If Left bottom is never tapped, the app assumes the worse case. A no-stop dive counts bottom time all the way to surfacing.
While the diver rests
- Fill in the Incident Identification card: agency, case number, incident type, dispatch time, location, IC, DSO, last seen point, search pattern, conditions.
- Record the Post-Dive Check for each diver.
- For a second dive, tap Plan Dive 2. The app carries the diver’s group forward and shows the adjusted no-decompression limit. A surface interval under 10 minutes earns no credit.
After the last dive
- Finish the Incident Narrative.
- Tap Generate Incident Report, check it in the report viewer, then tap Print / PDF.
- Print the ICS 206 and ICS 214 if your IC wants them in the incident file.
- Tap Export CSV for the dive log.
- Open Data & Backup and tap Download full backup. File it off the device.
- Check the Fly card before anyone drives over a pass or boards a flight.
- Only then tap New Incident.
If a diver is hurt
Tap DCS Emergency on the bottom bar. The card walks five steps in order, each with a Done now time stamp: call 911 / EMS, start 100% oxygen, position the diver, call the DAN Emergency Hotline, transport. It attaches the dive profile to send with the diver. This is field first aid only; treatment is decided by medical direction and chamber staff.
The forms, one by one
IncCommand has 17 cards. Six of them cover a routine callout; the rest are there when the incident needs them. The app will not save a dive without a diver selected, because every dive in the log needs a name. Other fields can be filled in any order.
All cards at a glance
| Card | Use it | Filled by | Prints or exports as |
|---|---|---|---|
| Team Manifest — ICS Roles | Every callout | Team leader | Incident report |
| Credential Check | When the incident needs special qualifications | DSO | On screen |
| Breathing Gas | Every callout | DSO | Dive log |
| Pre-Dive Safety Checklist | Every callout | DSO | Incident report |
| Altitude Correction / Water Type | Sites above sea level, fresh water | DSO | Dive log |
| Dive 1 / Dive 2 planner | Every dive | DSO | Print Plan |
| Dive Schedule / Operations Log | Every dive | Recorder | Incident report, CSV |
| Personnel Accountability (PAR) | Whenever a diver is in the water | Recorder | ICS 214 |
| Incident Identification | Every callout | IC or recorder | Incident report |
| Chain of Custody & Evidence Log | Recovery mode only | Recorder with the investigator | Incident report |
| Contaminated / Blackwater Ops | Contaminated water | DSO | Incident report |
| Last Seen & Search Segments | Searches | IC | ICS 214 |
| DCS / AGE Emergency | Suspected dive injury | Whoever is nearest | Post-dive record |
| ICS 206 Medical Plan | When an Incident Action Plan is written | Medical Unit Leader | Print ICS 206 |
| ICS 214 Activity Log | Every callout (mostly automatic) | Recorder | Print ICS 214 |
| Training Log | Every training day | Training officer | Training report, CSV |
| Flying & Altitude After Diving | Before travel | DSO | On screen |
Team Manifest — ICS Roles
Three fields per person: name, ICS role, certification. Tap a name to edit it. The six roles are Primary Diver, Standby (Rescue) Diver, Backup Diver, Dive Safety Officer (DSO), Log Tender / Recorder, and Medical / EFR.
Credential Check
Tap what This incident requires. The twelve choices are public safety diver, full-face mask, through-water comms, drysuit, ice diving, swiftwater, nitrox, evidence recovery, contaminated water, tender / line signals, CPR / O₂ provider, and night / zero-vis. The grid then shows, per requirement, how many members are verified, how many are self-reported, and who is not confirmed.
Breathing Gas
Four buttons: Air 21%, EAN32, EAN36, Custom. The card shows the maximum operating depth at ppO₂ 1.4 and 1.6. Rock bottom asks for cylinder, fill pressure and an optional air consumption rate, and returns the gas needed to get two divers up from the Dive 1 depth.
Pre-Dive Safety Checklist
Ten tick boxes with the OSHA reference beside each where one applies: standby diver ready; primary diver line-tended; reserve gas on every diver; communications checked; pre-dive medical; EMS and emergency O₂ on scene with nearest chamber identified; hazards controlled; search area and turn-around criteria briefed; gas analyzed and pressures logged; plan and abort criteria reviewed by the DSO.
Dive 1 and Dive 2
| Field | What to enter |
|---|---|
| Planning For | The diver. + New adds one on the spot |
| Residual N₂ | Leave on Auto — from this diver’s log. Pick a group by hand only for dives made earlier today outside this log |
| Cold / Strenuous | Optional extra margin: no-decompression limit cut 20% and the next-longer decompression schedule |
| Select Depth | A depth button, or the measured depth typed in |
| Bottom Time | A time button, or minutes typed in |
| Surface Interval | Hours and minutes, or tap Diver surfaced — start SI clock |
The result shows pressure group, no-decompression time remaining and CNS oxygen. If the time needs decompression, the stops and total ascent time appear. Dive 2 adds entry group, residual nitrogen time, equivalent single dive time and adjusted limit.
Dive Schedule / Operations Log
Each saved dive is a row with three live buttons in turn: Start, Left bottom, Surfaced. A finished row shows entry and exit times and actual bottom time. Each row also carries the air panel: start pressure, turn pressure, and Log report for each pressure the tender relays.
Incident Identification
| Group | Fields |
|---|---|
| Identity | Agency / Department, Agency Case / CAD Incident #, Incident Type (11 choices), Date / Time of Dispatch, Location / Site |
| Position | Entry / Dive Start GPS and Exit / Surface GPS, each with Detect; elapsed time entry to exit is worked out for you |
| Command | Incident Commander, Dive Safety Officer |
| Search | Last Seen Point / Witness Ref, Search Pattern (7 choices) |
| Conditions | Visibility (ft), Water Temp (°F), Current (kts), Bottom Composition; Get wind / waves at entry point needs a signal |
| Narrative | Sequence of events, entry and exit times, conditions |
| Emergency Aid Contacts | Chamber, hospitals, physician, transport, USCG Rescue Coordination Center |
| Post-Dive Check & DCS Record | Each diver’s condition after the dive; any symptoms, treatment and result |
Chain of Custody & Evidence Log (Recovery mode)
Evidence log reference, lead investigator with badge number, one line per item recovered, and water conditions notes for court testimony. IncCommand does not store photos. Photograph evidence with the agency camera and write the photo number in the item description.
Contaminated / Blackwater Ops
Switching this on opens a seven-item decon checklist and an exposure and decon log per person. Divers are added to that log automatically when they surface while the panel is on; add tenders and line handlers by hand. It records exposure and decontamination only, no medical information.
Last Seen & Search Segments
Enter the time the victim was last seen. Add witnesses with a bearing each, as true or magnetic bearings; two witnesses at different spots give a crossing point, and one witness with an estimated distance gives a point too. Split the search area into segments A, B, C and track each one.
ICS 206 Medical Plan
Follows the FEMA form block by block and is pre-filled from the Incident card.
| Block | Content |
|---|---|
| 1–2 | Incident name, operational period |
| 3 | Medical aid stations: name, location, contact, paramedics on site |
| 4 | Transportation: ambulance service, location, contact, ALS or BLS |
| 5 | Hospitals: name, address, contact, travel time by air and ground, trauma level, burn center, helipad. List the hyperbaric chamber here |
| 6 | Special medical emergency procedures, with a diving default you can reset to |
| 7–8 | Prepared by (Medical Unit Leader), approved by (Safety Officer), date and time |
ICS 214 Activity Log
Mostly fills itself. Dive events, PAR checks, mode changes, segments and alerts are logged automatically with the time. Add anything else with + Add entry. Blocks 1–5 are the header (incident name, operational period, unit leader, ICS position, home agency) and block 8 is prepared by. It prints in the FEMA ICS 214 layout.
Training Log
Per session: date, type, hours, location, instructor or evaluator, who attended, skills performed, notes. The card totals the last 12 months against the annual target hours you set. The training log is kept across incidents; New Incident does not clear it.
Ask (IC Command Assistant)
An AI question box for dive planning and ICS questions. It needs an internet connection; the rest of the app does not. Treat its answers as a reference, not as direction.
Limits and built-in safety rules
IncCommand plans SCUBA dives on air or nitrox to 130 fsw using U.S. Navy Rev 7 tables, and it leans conservative whenever it has to choose. Knowing the limits below is what lets a team trust the numbers.
Hard limits
| Item | Limit | Note |
|---|---|---|
| Depth | 1 to 130 ft | SCUBA maximum of 130 fsw (OSHA 29 CFR 1910.424). A typed depth rounds up to the next table row |
| Bottom time | 1 to 360 minutes | |
| Gas | Air, EAN32, EAN36, or custom 21 to 100% O₂ | No trimix and no advanced decompression gases. Complex gas operations need separate technical planning |
| Site altitude | Sea level to 10,000 ft | Rounds up to the next 1,000 ft |
| Surface interval | 0 to 24 hours | Under 10 minutes earns no credit |
| Cylinder fill for rock bottom | 500 to 4,500 psi | AL63, AL80, HP100, HP119, AL40 pony |
| Flying / altitude after diving | Destination up to 10,000 ft from the tables | Above 10,000 ft the app tells you to consult NAVSEA 00C |
| Incidents held at once | One, plus one copy of the previous incident | |
| Photos | None stored | Use the agency evidence camera |
| Medical information | None stored | Post-dive condition and DCS record only |
No-decompression limits shown on the depth buttons
These are the times printed on the buttons for a clean diver on air at sea level. They shorten for a repetitive dive, at altitude, or with Cold / Strenuous ticked. Always read the limit off the screen for the dive you are planning, not off this page.
| Depth (ft) | Limit (min) | Depth (ft) | Limit (min) |
|---|---|---|---|
| 10, 15, 20 | No limit | 70 | 48 |
| 25 | 1102 | 80 | 39 |
| 30 | 371 | 90 | 33 |
| 35 | 232 | 100 | 25 |
| 40 | 163 | 110 | 20 |
| 50 | 92 | 120 | 15 |
| 60 | 63 | 130 | 12 |
Rules the app enforces or warns on
| Situation | What IncCommand does |
|---|---|
| Depth 100 ft or more | Narcosis warning. Deeper than 100 fsw, or any decompression dive: chamber must be ready for use |
| Bottom time past the limit | Shows the required Navy decompression stops and total ascent time |
| Exceptional exposure schedule | Red Exceptional Exposure flag |
| Schedule with no repetitive group | No dive deeper than 20 fsw for 18 hours; 48 hours before going to altitude |
| Actual bottom time ran longer than planned | Recalculates the dive from the actual time. The result is never better than the plan |
| Dive ran into decompression that was not planned, or a short ascent on a decompression dive | Omitted decompression hold: the diver shows in red, is not counted as ready, and Start is refused until someone records who cleared them |
| Diver with a hold goes to a new incident | The hold follows the diver for the 48 hours that earlier dives are carried over |
| Fresh water | Used only for ppO₂, maximum operating depth and CNS. Table depth is never reduced |
| Team arrived at altitude under 12 hours ago | Applies the Navy altitude-arrival group automatically once an arrival time is set |
| Rescue mode staffing | Green with Primary and Standby assigned; warning without a Standby |
| Recovery mode staffing | Red Staffing Incomplete until Primary, Standby, DSO and Tender are all assigned |
| Turn pressure set at or above start pressure | Rejected |
| Turn pressure below rock bottom | Warning |
| Diver projected to reach turn pressure | Beep and alert: get a pressure report |
| PAR interval reached | Prompts a check; every check goes into the ICS 214 |
| Same incident open in two tabs or windows | The older copy stops saving and offers Load the latest copy |
Settings your SOG decides
- PAR interval: 5, 10, 15, 20 or 30 minutes. The clock starts when the first diver enters the water and restarts after each completed check.
- Turn pressure: type your own, or tap two-thirds of start (the rule of thirds, rounded up to 50 psi), or use rock bottom from the Gas card when it was worked out for that depth or deeper.
- Annual training hours.
Depth at altitude
Enter the actual depth. A dive computer or gauge re-zeroed at the site is used as read. A sealed, sea-level-referenced mechanical gauge needs 1 fsw added per 1,000 ft of elevation first.
What the OSHA notes mean
The app cites OSHA’s commercial diving standard beside several items. It also states that the standard generally does not apply to search, rescue and related public safety diving by or under the control of a governmental agency, and that the exemption is narrow. Confirm with your agency and legal counsel which requirements apply to your operation.
Saving your work
There is no Save button to remember. Every field saves as you type, on this device only, and a Saved marker at the bottom of the page confirms it.
| Feature | What it does |
|---|---|
| Autosave | Saves every field as you type. Close the app, reopen it, and the incident is still there |
| Resume prompt | A Dive 1 or Dive 2 plan in progress survives a reload for up to 24 hours. The app offers Resume Plan or Discard; it never applies an old plan silently |
| Earlier versions | A copy is kept every few minutes while you work. Open Restore an earlier version in the Autosave & Recovery card to go back |
| Save & Refresh App | Saves, then reloads the app. Use it to pick up a new build without losing fields |
| Second-tab guard | If the incident is updated in another tab or window, the out-of-date copy stops saving and offers Load the latest copy |
| Storage status | The card shows whether storage is protected from automatic clean-up. Installing to the Home Screen protects it |
Reset Plan versus New Incident
- Reset Plan clears the Dive 1 and Dive 2 plan you are working on and sets the gas back to Air. The saved dive log, team and incident fields stay.
- New Incident clears the dive log, team, nitrogen status and all incident fields. Altitude and water-type settings are kept. It asks you to confirm, and asks again if a diver is still logged in the water.
What New Incident keeps
| Kept | For how long | Why |
|---|---|---|
| One copy of the incident it just cleared | Until the next New Incident | An accidental clear can be undone from Data & Backup |
| Each diver’s dives | 48 hours, matched by name | Residual nitrogen, flying limits and any omitted-decompression hold carry into the next callout |
| Training log | Always | It is a team record, not an incident record |
Backups
Autosave protects you from closing the app. It does not protect you from a lost or wiped device. Take a backup file after every incident; the next chapter shows how.
Back up, restore and share
IncCommand keeps your records on the device and nowhere else. That leaves three jobs for the team: protect the device’s storage, take a backup file after every incident, and send reports to the people who need them.
Protect the device’s storage (once per device)
Web browsers are allowed to clear a site’s saved data on their own, for example when the device runs low on space, or in Safari when a site has not been opened for 7 days. Persistent storage is the browser’s promise not to do that to IncCommand.
- Open IncCommand from its Home Screen icon, not from a browser tab.
- Scroll down to Data & Backup and tap the header to open the card.
- Read the first line of the card.
- If it says This browser has agreed to keep IncCommand data (persistent storage), you are done.
- If it says Storage is not marked persistent, tap Ask to keep data.
- If the browser refuses, the app tells you. On iPhone or iPad, use the Home Screen app. On Android or a computer, install the app, then check the card again.
When you open it from the Home Screen icon, IncCommand usually asks for this on its own, so many teams will find it already granted. The same line shows how much storage the app is using.
Protected storage stops the browser’s automatic clean-up. It does not help if the device is lost, broken or reset, or if someone clears the browser’s data by hand. That is what the backup is for.
Take a backup
- Open Data & Backup and tap Download full backup.
- On a phone or tablet the share sheet opens. Choose where the file goes: Save to Files, email, AirDrop, or your agency’s drive app. On a computer the file lands in Downloads.
- The file is named IncCommand-backup- followed by the date and time, and ends in .json.
- Move it to where your agency keeps records.
One backup file holds everything on the device: this incident, the previous incident, dives from earlier callouts, and the training records. It is a data file for IncCommand to read back, not a document for people to read. For reading, use the reports.
Take a backup:
- After every incident, before you tap New Incident
- After every training day
- Before you replace, reset or hand over the device
Restore a backup
- Get the backup file onto the device (email, AirDrop, a drive app, a USB stick).
- Open Data & Backup and tap Restore backup, then pick the file.
- The app shows the date of the backup and asks you to confirm. It warns that the restore replaces the current incident and the training records on this device.
- Confirm. The app reloads with the backup’s contents.
Two things to know before you confirm:
- The incident that was on the device is kept as the Previous incident copy, so it can be brought back.
- Training records on the device are replaced by the ones in the backup. If the device holds training sessions that are not in the backup file, download a backup of the device first.
A file that is not an IncCommand backup is refused and nothing changes.
Move to a new tablet
- On the old device, tap Download full backup and send the file to yourself.
- On the new device, open depthplanner.com/inccommand/, add it to the Home Screen and protect its storage.
- Tap Restore backup and pick the file.
Undo an accidental New Incident
New Incident keeps one copy of the incident it cleared. Open Data & Backup; under Previous incident you will see its name and when it was cleared. Tap Restore previous incident. The two swap places: the incident on screen becomes the previous copy. The app will not swap while a diver is logged in the water.
Share a report
The Incident Dive Report, ICS 206, ICS 214 and Training Report each open in a report viewer with the same buttons across the top.
| Button | What it does | Use it for |
|---|---|---|
| Edit | Closes the report and takes you back to the form | Fixing a field before you send |
| Print / PDF | Opens the print dialog. Choose Save as PDF to make a file | The official copy for the incident file |
| Opens your email app with the report as text. A long report is cut off in the email and the full text is copied for you to paste in | A quick summary to the IC or chief | |
| Text | Opens a text message the same way | A short status to one person |
| Share | Opens the device’s share sheet with the report as a file | AirDrop, a drive app, a messaging app |
| Save | Downloads the report as a file | Attaching to an email yourself |
For the record, save the report as a PDF. Email and Text send plain text, which is fine for a heads-up but is not the formatted report.
What goes where
| Item | Send it to | How |
|---|---|---|
| Incident Dive Report | The agency’s incident file, the Incident Commander | Print / PDF |
| ICS 206 and ICS 214 | The Incident Action Plan and incident file | Print ICS 206, Print ICS 214, then Print / PDF |
| Dive log | Records system or a spreadsheet | Export CSV |
| Training report | Training officer | Print training report or Export CSV |
| Full backup | Records custodian, stored off the device | Download full backup |
Reports and backups can contain case numbers, names and locations. Send them only through the channels your agency approves for incident records.
Exporting and printing
Seven things come out of IncCommand. Printing uses the device’s own print dialog, so Save as PDF works wherever printing does.
| Output | Button | Format | Use |
|---|---|---|---|
| Dive plan | Print Plan on the Dive 1 card | Print or PDF | Brief the dive; hand a copy to the IC |
| Incident dive report | Generate Incident Report, then Print / PDF in the report viewer | Print or PDF | The agency’s incident file |
| Dive log | Export CSV under the Operations Log | CSV, named IncCommand_ plus your case number | Spreadsheet, records system |
| ICS 206 Medical Plan | Print ICS 206 | Print or PDF | Attach to the Incident Action Plan |
| ICS 214 Activity Log | Print ICS 214 | Print or PDF, FEMA layout | Unit log for the incident file |
| Training record | Print training report or Export CSV | Print, PDF or CSV | Annual training documentation |
| Full backup | Download full backup | JSON file | Archive and device transfer |
The dive log CSV has one row per dive. Its columns include gas, ppO₂, CNS %, whether decompression was required, the stops actually made beside the table stops, total ascent time, exit group, entry, left-bottom and exit times, actual bottom time, an omitted-decompression flag, altitude, and the Cold / Strenuous setting.
End-of-incident filing, in order
- Incident report to PDF.
- ICS 206 and ICS 214 to PDF, if used.
- Dive log CSV.
- Full backup.
- Move all four off the device to where the agency keeps incident records.
- Then New Incident.
Troubleshooting and common questions
| Question | Answer |
|---|---|
| Does it work with no signal? | Yes, once installed to the Home Screen. Only the Ask assistant, wind / waves and conditions lookups need a connection |
| Where is our data? | On the device, in the app’s own storage. Nothing is uploaded |
| Can two devices share one incident? | No. One device holds the incident. Move it with Download full backup and Restore backup |
| The app says this copy is out of date | The incident is open in another tab or window. Tap Load the latest copy and close the extra one |
| Fields were empty when I reopened it | On an iPhone or iPad the app was probably opened in a Safari tab, not from the Home Screen icon. Check Restore an earlier version, then your last backup |
| I cleared the incident by mistake | Open Data & Backup. New Incident keeps one copy of the incident it cleared so the clear can be undone |
| Detect will not fill GPS | Allow Location for the browser or app, then try again |
| The app will not let a diver start | Check for a red omitted-decompression hold on that diver. It needs a recorded clearance |
| A diver shows nitrogen from yesterday | Dives carry over for 48 hours, matched by name. That is intended |
| Two people have the same name | Enter them differently, for example with a middle initial, so their dives are not merged |
| The plan came back after a reload | That is the resume prompt. Tap Resume Plan or Discard |
| No alert sound | Turn the volume up and take the device off silent. Tap the screen once after opening so the browser allows sound |
| How do we get a new version? | Tap Save & Refresh App while online. The build number is at the bottom of the page |
| The numbers differ from a diver’s computer | Expected. IncCommand uses Navy tables on planned square profiles; a computer tracks the real profile with a different model. Follow the more conservative of the two and your SOG |
One-page checklists
Print this section and keep it with the device.
Device setup (once per device)
- IncCommand added to the Home Screen and opened from the icon
- Ask to keep data tapped; storage shows as protected
- Location allowed
- Volume up, silent mode off
- Team entered in the manifest with consistent names
- Annual target hours set in the Training Log
- Charger and paper tables with the device
Every callout
- Mode set: Rescue or Recovery
- Primary and Standby assigned (plus DSO and Tender in Recovery)
- Gas selected; rock bottom worked out
- Altitude and water type checked
- Pre-Dive Safety Checklist 10/10
- Dive planned and saved to the schedule
- Start, Left bottom, Surfaced tapped for every dive
- Start pressure, turn pressure and reports logged
- PAR checks answered
- Post-dive check recorded for every diver
End of incident
- Incident card and narrative complete
- Incident report saved as PDF
- ICS 206 and ICS 214 printed if used
- Dive log CSV exported
- Full backup downloaded and filed off the device
- Fly card checked before travel
- New Incident tapped last
IncCommand is not a substitute for dive training, a certified dive supervisor, or an approved dive computer. U.S. Navy Diving Manual Rev 7 tables. Decisions in the field remain the responsibility of the Dive Safety Officer. Always comply with your department’s SOG and applicable OSHA / NFPA regulations. Diverobotix LLC · depthplanner.com