DiveCommand User Manual
How to plan, compare and log dives in DiveCommand: step-by-step planning, gradient factors, Tech mode, limits, and Free versus Pro.
Start here
DiveCommand is the DepthPlanner planner for recreational and technical divers. It runs the Bühlmann ZHL-16C model with gradient factors, the algorithm family behind many dive computers, and tracks all 16 tissue compartments across every dive and surface interval. Use it to plan ahead, compare options and keep a log; your dive computer still runs the dive.
DiveCommand is labeled for educational use. It is not a substitute for dive training or a certified dive computer. Always dive within your certification limits.
Labels in bold are the words on the screen.
Getting in
| Version | Where | How |
|---|---|---|
| Pro | depthplanner.com/planner/ | Enter the access password sent on your receipt |
| Free | depthplanner.com/free/ | No password |
| iPhone | DiveCommand in the App Store | Install and open |
On the web versions, add the page to your Home Screen and open it from that icon. It then opens like an app and your dives stay on the device.
Plan a dive, step by step
- Settings. Leave Altitude at Sea Level, Water at Salt and Units at Imperial unless your dive differs. At altitude, pick the elevation from the list.
- Select Breathing Gas. Air, EAN32, EAN36, EAN40 or Custom nitrox.
- Dive 1. Tap a depth button, then a bottom time, or type both. The no-decompression limit, nitrogen load and CNS oxygen update at once.
- Read the Nitrogen Status bar. Green is safe, amber is approaching the limit, red is at or over it. The leading compartment is the one controlling your limit right now.
- Tap Log Dive to save it, Print Plan for paper, or Share Plan to send it to your buddy.
- When you surface, tap Start SI Timer. The planner shows nitrogen clearing in real time and the adjusted limit for the next dive. You can also type the surface interval.
- Tap Plan Next Dive for Dive 2, and again for Dive 3.
Bottom time counts from leaving the surface until you begin your final ascent. The planner reminds you of a safety stop of 3 to 5 minutes at 15 ft on every dive and an ascent no faster than 30 ft/min.
Multi-level dives
Tick Multi-level dive, then + Add Level for each depth and time. The planner tracks nitrogen through each level in order.
Gradient factors
DiveCommand uses GF 50/85 in Recreational mode and GF 50/70 in Tech mode. Both match Shearwater’s current defaults: 50/85 is the Rec mode Medium conservatism preset and 50/70 is the Tec mode default.
Gradient factors are two numbers, written GF Low / GF High, that set how far below the Bühlmann limit you stay.
- GF Low decides how deep your first decompression stop is. It only matters once a dive needs decompression.
- GF High decides your margin when you surface. It sets your no-decompression limit and the length of the shallow stops.
Shearwater’s defaults, old and new
Shearwater raised its default GF Low to 50. GF High did not change on any setting, so no-decompression dives are unaffected. The update is rolling out model by model; check the release notes for your computer and look at the numbers actually set on it. More in Shearwater Changes Its Default Gradient Factors.
| Shearwater setting | Old default | New default | DiveCommand |
|---|---|---|---|
| Tec mode | 30/70 | 50/70 | Tech mode default |
| Rec, High conservatism | 35/75 | 50/75 | Set by hand in Tech mode |
| Rec, Medium conservatism | 40/85 | 50/85 | Recreational mode |
| Rec, Low conservatism | 45/95 | 50/95 | Set by hand in Tech mode |
Setting them
Recreational mode is fixed at 50/85. Switch on Tech Mode and open the Gradient Factors card to move the sliders (GF Low 10 to 90, GF High 50 to 100) or tap a preset: 20/70 very conservative, 30/70 conservative, 50/70 factory, 50/85 moderate.
If your computer runs different numbers, set DiveCommand to the same pair in Tech mode before comparing. Match the Deco Profile card too: how bottom time is counted, last stop at 10 or 20 ft, and descent and ascent rates. Even then, expect a minute or two of difference from rounding and ascent conventions. For the theory, see Gradient Factors Explained.
Never raise GF High toward 95 to 100 to make a profile more aggressive without decompression training. That removes almost all of the margin.
No-decompression limits at GF 50/85
These are the limits on the depth buttons for air, salt water, sea level, first dive. They are shorter than the PADI and SSI tables. Plan cold or strenuous dives as if 10 ft deeper.
| Depth (ft) | Limit (min) | Depth (ft) | Limit (min) |
|---|---|---|---|
| 20, 25, 30 | 300+ | 80 | 22 |
| 35 | 189 | 90 | 17 |
| 40 | 121 | 100 | 14 |
| 50 | 68 | 110 | 11 |
| 60 | 44 | 120 | 9 |
| 70 | 31 | 130 | 8 |
Tech mode
Tech Mode adds custom gradient factors, trimix, a travel gas and two decompression gases, and full decompression schedules.
| Setting | Range |
|---|---|
| Trimix oxygen | 18 to 100%. No hypoxic mixes |
| Trimix helium | 0 to 80% |
| Gas switch depth | Leave blank to switch at the gas’s maximum operating depth at ppO₂ 1.6, rounded shallower to the stop grid. A depth you enter is used as given, never deeper than that limit |
| Last stop | 10 ft / 3 m or 20 ft / 6 m |
| Stops | Every 10 ft, or 3 m in metric |
| Ascent between stops | 30 ft/min |
Other tools on the page
| Tool | What it does |
|---|---|
| Surface Interval Planner | Shows how much no-stop time you get back the longer you wait, or how long to wait for the bottom time you want |
| Dive Timeline | Past dives, your nitrogen now, and planned dives, each starting from the nitrogen you will really have |
| Import from your dive computer | Garmin: export the original .zip from Garmin Connect. Shearwater and others: export as UDDF. The real profile goes into your log and the timeline |
| Dive Log | Site, buddy, dive type, entry type, time in, actual depth and bottom time, start and end pressure, water temperature, visibility, notes, entry and exit GPS, photo |
| Gas Planning | Enter your SAC rate or work it out from a past dive; pick a tank and a gas rule: thirds, halves, 500 psi reserve, or quarters |
| Conditions Check | Swell, wind and tide at your location; needs a signal |
| Pre-Dive Equipment Checklist | Tick list, printable |
| Ballast Weight Calculator | A starting estimate. Always verify buoyancy in shallow water |
| Flying After Diving | 12 hours after a single no-decompression dive, 18 hours after multiple or multi-day diving, more than 18 (24 recommended) after decompression dives. The countdown keeps running if you close the app |
| Dive Sites | Map of dive site locations |
| Emergency | Call emergency services, give 100% oxygen if trained, then call the DAN hotline. Regional DAN numbers are listed |
Limits
| Item | Limit |
|---|---|
| Recreational depth buttons | 20 to 130 ft |
| Recreational nitrox | Custom 21 to 40% O₂; maximum operating depth at ppO₂ 1.4 is enforced |
| Bottom time | 1 to 300 minutes |
| Dives per plan | Three, with surface intervals up to 24 hours |
| Altitude | Sea level to 8,000 ft in the list. Wait about 6 hours after arriving before diving |
| Logged depth | Up to 200 ft |
Free versus Pro
| Free | Pro | |
|---|---|---|
| Dives per day | 2 | 3 |
| Multi-level dives | No | Yes |
| Tech mode (custom gradient factors, trimix, deco gases) | No | Yes |
| Decompression stop schedules | Warning only | Full schedule |
| No-fly | Basic minimums | Live countdown |
| Dive log | 10 most recent entries | Full log with CSV export |
| Share Plan | No | Yes |
| Import from a dive computer | No | Yes |
Saving and exporting
Everything saves on your device; there is no account. The log warns you if storage is full.
| Output | Button |
|---|---|
| Dive plan on paper or PDF | Print Plan |
| Plan to a buddy | Share Plan |
| Dive log spreadsheet | Export CSV in the Dive Log |
| Equipment checklist | Print Checklist |
Export your log to CSV regularly and keep the file somewhere other than your phone.
DiveCommand is for educational use. It is not a substitute for dive training or a certified dive computer. Always dive within your certification limits. Never dive alone. Diverobotix LLC · depthplanner.com