Table 9-7 answers two practical questions for an air dive: What is the no-decompression limit at this depth? And which repetitive group do I carry forward after the dive?
The table appears in the U.S. Navy Diving Manual, Revision 7, Change A, Volume 2, Chapter 9, “Air Decompression,” on page 9-63. This guide explains how to read it. It does not replace the complete manual, diver training, a qualified dive supervisor, or your organization’s procedures.
For a broader introduction to the chapter, start with Navy Dive Tables 101: A Beginner’s Guide to U.S. Navy Rev 7.
Get the printable Table 9-7 card
Want a quick reference for study or the boat? Download the free, one-page Table 9-7 PDF. Print it, laminate it, and keep it on the boat if that suits your workflow. Check every entry against the official manual before operational use; a quick-reference card is an aid, not a substitute for the source.

What Table 9-7 contains
Table 9-7 is titled “No-Decompression Limits and Repetitive Group Designators for No-Decompression Air Dives.” Depths are shown in feet of seawater (fsw). For each depth, the table lists a no-stop limit and time values associated with repetitive group letters.
The no-stop limit is the maximum bottom time listed for a no-decompression air dive at that depth. The group letter is a separate result: it represents the diver’s nitrogen-loading category at the end of the dive under the Navy table procedure. It is not a percentage or a direct reading of one individual tissue compartment.
Here are the no-stop limits:
| Depth (fsw) | No-stop limit (min) |
|---|---|
| 10 | Unlimited |
| 15 | Unlimited |
| 20 | Unlimited |
| 25 | 1,102 |
| 30 | 371 |
| 35 | 232 |
| 40 | 163 |
| 45 | 125 |
| 50 | 92 |
| 55 | 74 |
| 60 | 63 |
| 70 | 48 |
| 80 | 39 |
| 90 | 33 |
| 100 | 25 |
| 110 | 20 |
| 120 | 15 |
| 130 | 12 |
| 140 | 10 |
| 150 | 8 |
| 160 | 7 |
| 170 | 6 |
| 180 | 6 |
| 190 | 5 |
“Unlimited” appears at 20 fsw and shallower in the no-stop-limit column. It does not mean unlimited time is safe or appropriate in practice. Other physiological, environmental, training, and operational limits still apply.
Read the table in two conservative steps
1. Select the depth row
Use the row equal to the dive’s maximum depth. If the depth falls between listed values, select the next greater depth. For example, if the maximum depth is 64 fsw, use the 70-fsw row, not the 60-fsw row.
This deeper-row rule avoids treating a dive as shallower than it was.
2. Compare bottom time with the limit and group entries
Read the no-stop limit in the selected row. Then, to find the repetitive group, use the group-time entries in that same row. If the actual bottom time falls between listed times, round up to the next listed time. Do not round down to a shorter time.
A group letter is assigned after every dive, including a no-decompression dive. Record it for the next dive’s planning. Table 9-7 alone does not calculate a repetitive dive: the next step uses the group and surface interval with Table 9-8.

Worked example: a 60-fsw dive
Suppose the maximum depth is 60 fsw and bottom time is 40 minutes.
- Find the 60-fsw row.
- The no-stop limit is 63 minutes. Forty minutes is within that limit.
- In the repetitive-group entries for that row, 40 minutes falls after the 39-minute value and at or before the 45-minute value. Round up to the next applicable entry: the ending group is H.
If the dive at 60 fsw were 20 minutes instead, the next applicable group-time entry is 22 minutes, which corresponds to Group D.
These examples show how to read the row; they are not recommendations for dive duration. For the complete group entries, use the printable card alongside the full manual.
What the group letter means for the next dive
The repetitive group is a lettered summary of nitrogen loading under the table’s procedure. After surfacing, carry that letter into Table 9-8, along with the surface interval, to determine residual nitrogen time for a subsequent air dive.
In plain terms, the letter helps account for nitrogen remaining from the earlier dive. It is not a stand-alone repetitive-dive limit, and it does not replace the Table 9-8 steps. For more context on how the Chapter 9 tables fit together, see the series overview.
Understand the asterisk
Table 9-7 includes an asterisk footnote: “Highest repetitive group that can be achieved at this depth regardless of bottom time.”
The asterisk is not a bottom time. It marks a group limit in the table: at that depth, the indicated group is the highest one achievable regardless of bottom time. Read the footnote with the relevant row rather than interpreting the symbol as a time value.
When the dive exceeds the no-stop limit
If the bottom time exceeds the selected row’s no-decompression limit, do not treat it as a no-decompression dive under Table 9-7. The required decompression schedule comes from Table 9-9, the Air Decompression Table, using the manual’s applicable instructions and procedures.
The manual specifies a descent rate of 75 feet per minute (fpm) and an ascent rate of 30 fpm. For decompression schedules, ascent time between stops is included in the subsequent stop time. These are procedural details, not optional adjustments to make from a cropped table or memory. Read the complete applicable schedule and notes.
Sea-level air table, not an altitude shortcut
Table 9-7 is for air diving at sea level. Do not apply its entries unadjusted to an altitude dive. The manual provides altitude procedures elsewhere in Chapter 9, including Tables 9-5 and 9-6; follow the applicable procedure in the full manual. Depth, altitude, and dive history can affect which table steps apply.
The table’s deepest listed row is 190 fsw. That is not permission to conduct a SCUBA dive at that depth. In U.S. commercial diving, OSHA sets separate limits by diving mode: SCUBA is limited to 130 fsw under 29 CFR 1910.424, while surface-supplied air diving has a separate general 190-fsw limit under 29 CFR 1910.425, with specific regulatory provisions and exceptions. Follow the rules and procedures that govern the operation. Recreational divers should follow their training agency’s limits; many recreational air programs cap depth at 130 ft (40 m).

Use the table as part of a complete plan
Table 9-7 is one component of a dive-planning process. Confirm the correct manual and revision, select the conservative depth and time entries, record the group, and use the correct procedure for repetitive dives, decompression, or altitude. The official NAVSEA Diving Publications page is the place to locate the source manual.
Recreational divers commonly use agency-specific planning methods and tables; commercial and public-safety operations may use U.S. Navy Rev 7 procedures where required by their governing practices. These methods are not interchangeable. NavCommand provides digital planning using USN Rev 7 tables for commercial operations, but software does not replace the manual, training, or qualified supervision.
When in doubt, stop and verify the complete procedure with the official U.S. Navy Diving Manual and the qualified personnel responsible for the dive.